#DTP1079: Max-E-Tork Eprom 1994-1995 GM 6.5 C-K Trucks, Suburban, Blazer
|
|
|
|
Catalog Number |
|
1 |
|
|
|
DTP1079 |
|
$369.00 |
|
|
|
Brand:
|
|
DTP Performance
|
|
|
Supported models:
|
|
GM9495
|
|
|
Product notes:
|
|
The Max-E-Tork delivers unmatched throttle response and torque and greatly improved drive-ability in every throttle setting. We need the 4-digit letter-code off the original e-prom in order build just the right programming into your new Max-E-Tork. The 4-digit letter code we need in order to do your Max-E-Tork eprom, can be found on the computer behind the glove box. On 94 trucks and Subs, you gain access by removing the 4 screws that hold the glove box liner in place. Behind the glove box you will find the computer box. There is a white paper label on the computer box. On it you should find the 4-digit letter code (starts with the letter B). If the label does not feature the 4-letter code, you can find the code on the original eprom inside the computer box. Remove the computer box from its mount tray by sliding it to the rear to disengage the locating pins and spring clips. Then weasle the box out into the open area of the glove box openning and rotate it upside down. On the bottom of the computer is an inspection plate held in place by a single #15 torx screw. Remove the screw and plate. You will see the original eprom inside. On it you will find the 4-letter code. Call us with this code to place your order. 1995 trucks and Subs feature a revised dash panel. Access to the computer box is gained by removing the glove box assembly. To remove the glove box, release the cable stop located on the drivers side of the box and then push in on both sides of the box, similtaneously to release the two bump stops which prevent the box from openning beyond the normal open position. Then swing the box assembly further open until it is released from the hinges at its bottom. The box assembly can then be completely removed to gain access to the computer box. The ID code is located on the outside of the box and on the eprom inside under the inspection plate. Call us with this code to place your order. Maximum performance is assured by combining the Max-E-Tork with our Turbo-Master boost control. Save money by taking advantage of our COMBO or one of the Packages featuring the Max-E-Tork. Our hi-flow exhaust system is recommended for maximum performance. A pyrometer is a good idea when towing. Heath Diesel insists on your complete happiness with its products. The Max-E-Tork is offered with a 3 month satisfaction guarantee and a 3 year, free replacement warranty! You will not be disappointed!
|
|
|
Web site:
|
|
www.lightdutytruckparts.com
|
|
|
Weight:
|
|
2 lbs.
|
|
|
|
For more information or to order this item call:
720-685-9370
|
|
|
want to speak to a real human being?
720-685-9370
|
|
|
